logo
Productos
DETALLES DE LAS NOTICIAS
En casa. > Noticias >
What a Double-Flange Transmitter Really Isolates: A Technical Bulletin on Remote Seal Level Measurement
Eventos
Contacta Con Nosotros
Mrs. yuna
86-755-26850716
En WeChat 13590622754
Contacta ahora

What a Double-Flange Transmitter Really Isolates: A Technical Bulletin on Remote Seal Level Measurement

2026-11-16
Latest company news about What a Double-Flange Transmitter Really Isolates: A Technical Bulletin on Remote Seal Level Measurement

Isolation Does Not Mean Blocking Pressure

Double-flange differential pressure transmitters are often described as a way to keep pressure out of the instrument. That description is misleading. The diaphragm seal isolates the medium, the heat, the crystallization and the leak path. It does not isolate pressure. Pressure is exactly what must still travel into the measuring cell.

A blocked impulse line on a closed reactor with a crystallizing caustic solution illustrates the point: the vessel needs a level reading, the impulse line needs a reading the hard way, and within days the line plugs. The usual field answer is a double-flange seal assembly, which raises the obvious question of what the isolation layer is actually doing.

The Signal Chain in Five Steps

  1. The process medium acts on the isolation diaphragm, the only wetted surface in the assembly.
  2. The diaphragm deflects slightly and displaces fill fluid inside the seal cavity.
  3. Capillaries transmit that hydraulic displacement to the transmitter body.
  4. The DP sensor calculates differential pressure, applies temperature compensation and zero elevation.
  5. A 4 to 20 mA or HART signal is delivered to the control system.

Because the fill fluid is essentially incompressible, process pressure reaches the sensing diaphragm with almost no attenuation. What is stopped is matter, heat, phase change and the leak path.

Five Layers of Isolation

LayerWhat Is IsolatedPractical Consequence
MediaCorrosive or abrasive process fluidCorrosion is confined to a selectable, replaceable diaphragm
TemperatureHigh process heatThe head can be mounted away from the hot zone
CrystallizationScaling and plugging in small boresNo impulse legs means no blocked legs
Leak and contaminationToxic, volatile or high-value mediaA closed fill circuit has no joints to leak
Installation riskHeat, vibration and corrosion at the tapFragile parts move to a serviceable front end

What Engineers Should Specify

  • Diaphragm material chosen from medium corrosion, concentration, temperature and particle content, not from price.
  • Fill fluid chosen from temperature and vacuum conditions: standard, high-temperature or low-temperature silicone oil, fluorinated oil, or sanitary grade.
  • Capillaries equal in length, routed together, armored and kept away from one-sided heat sources.
  • Zero elevation recalculated from real geometry: empty vessel at 4 mA, full vessel at 20 mA.

Where Double-Flange Is the Wrong Choice

The technology carries inherent displacement error from diaphragm stiffness and fill volume. In very low differential pressure service, or with very long capillaries, that error becomes a large share of the reading and response lag grows. For clean media at ambient temperature, a direct-mount transmitter is more economical and more accurate.

About the Supplier

Great System Industry Co. Ltd has supplied process control instrumentation and electrical equipment since 1998, serving more than 6000 customers with a product range built around application engineering rather than catalog matching.

Productos
DETALLES DE LAS NOTICIAS
What a Double-Flange Transmitter Really Isolates: A Technical Bulletin on Remote Seal Level Measurement
2026-11-16
Latest company news about What a Double-Flange Transmitter Really Isolates: A Technical Bulletin on Remote Seal Level Measurement

Isolation Does Not Mean Blocking Pressure

Double-flange differential pressure transmitters are often described as a way to keep pressure out of the instrument. That description is misleading. The diaphragm seal isolates the medium, the heat, the crystallization and the leak path. It does not isolate pressure. Pressure is exactly what must still travel into the measuring cell.

A blocked impulse line on a closed reactor with a crystallizing caustic solution illustrates the point: the vessel needs a level reading, the impulse line needs a reading the hard way, and within days the line plugs. The usual field answer is a double-flange seal assembly, which raises the obvious question of what the isolation layer is actually doing.

The Signal Chain in Five Steps

  1. The process medium acts on the isolation diaphragm, the only wetted surface in the assembly.
  2. The diaphragm deflects slightly and displaces fill fluid inside the seal cavity.
  3. Capillaries transmit that hydraulic displacement to the transmitter body.
  4. The DP sensor calculates differential pressure, applies temperature compensation and zero elevation.
  5. A 4 to 20 mA or HART signal is delivered to the control system.

Because the fill fluid is essentially incompressible, process pressure reaches the sensing diaphragm with almost no attenuation. What is stopped is matter, heat, phase change and the leak path.

Five Layers of Isolation

LayerWhat Is IsolatedPractical Consequence
MediaCorrosive or abrasive process fluidCorrosion is confined to a selectable, replaceable diaphragm
TemperatureHigh process heatThe head can be mounted away from the hot zone
CrystallizationScaling and plugging in small boresNo impulse legs means no blocked legs
Leak and contaminationToxic, volatile or high-value mediaA closed fill circuit has no joints to leak
Installation riskHeat, vibration and corrosion at the tapFragile parts move to a serviceable front end

What Engineers Should Specify

  • Diaphragm material chosen from medium corrosion, concentration, temperature and particle content, not from price.
  • Fill fluid chosen from temperature and vacuum conditions: standard, high-temperature or low-temperature silicone oil, fluorinated oil, or sanitary grade.
  • Capillaries equal in length, routed together, armored and kept away from one-sided heat sources.
  • Zero elevation recalculated from real geometry: empty vessel at 4 mA, full vessel at 20 mA.

Where Double-Flange Is the Wrong Choice

The technology carries inherent displacement error from diaphragm stiffness and fill volume. In very low differential pressure service, or with very long capillaries, that error becomes a large share of the reading and response lag grows. For clean media at ambient temperature, a direct-mount transmitter is more economical and more accurate.

About the Supplier

Great System Industry Co. Ltd has supplied process control instrumentation and electrical equipment since 1998, serving more than 6000 customers with a product range built around application engineering rather than catalog matching.

Mapa del sitio |  Política de privacidad | China es buena. Calidad GE Bently Nevada Proveedor. Derecho de autor 2021-2026 GREAT SYSTEM INDUSTRY CO. LTD Todo. Todos los derechos reservados.